Despatch MIC1422 Controller Manuel d'utilisateur télécharger pdf (Page 51)

* The Hardware Definition Code and input jumper configuration may need to be changed. See

Appendices A and B.

** If Remote Setpoint Input has been selected in the Hardware Definition Code, this parameter will

appear in the normal Program Mode parameter sequence. The upper display shows a product code

which defines the input range. The factory setting depends on code selected, see Appendix B.

*** An Alarm Hysteresis output is made active only when both alarms become active; it subsequently

becomes inactive only when both alarms are inactive. Thus, the status of an Alarm Hysteresis output

only when one alarm is active depends upon the alarm status immediately prior to that alarm being

activated.

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 90 91

Pas de commentaire

Despatch MIC1422 Controller Manuel d'utilisateur Page 51