Despatch MIC1462 Controller Manual Manuel d'utilisateur télécharger pdf (Page 38)

3.21 Viewing Program Progress/Status

In Program Run Mode, a number of displays are made available to the operator (in the

Message Display area) which indicate program progress/ status. While the current

program is running, held or delayed, press the SCROLL key to cycle through a

sequence of program status displays with the following legends in the Message Display:

In the case of Segment Time Remaining or Deviation-Hold Time display, the time is in

hours/minutes (if the x60 indicator is OFF) or minutes/seconds (if the x60 indicator is

ON). The Delay Time display is always in hours/minutes.

Note: If the SCROLL key is held for two seconds or longer the instrument will auto-

scroll through the above display cycle (with the exception of the Self-Tune and Pre-

Tune displays). The auto-scroll can be stopped by pressing any key other than the

SCROLL key.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 111 112

Pas de commentaire

Despatch MIC1462 Controller Manual Manuel d'utilisateur Page 38