Despatch MIC1462 Controller Quick Start Manuel d'utilisateur télécharger pdf (Page 3)

POWER UP PROCEDURE

Verify all electrical connections have been properly made before applying power to the

instrument.

If the instrument is being powered for the first time, it may be desirable to disconnect

the controller output connections. The instrument will be into control following the

power up sequence and the output(s) may turn on. During Power up, a self-test

procedure is initiated during which all LED segments in the two front panel displays

appear and all LED indicators are on. When the self-test procedure is complete, the

instrument reverts to normal operation.

Note: When power is first applied, a delay of approximately 3 seconds will be seen

before the displays light up.

KEYPAD OPERATION

MODE Key

Cycles through modes available in the instrument.

SCROLL Key

Displays the next parameter in sequence (indicated by Message display).

UP Key

Increments displayed parameter value/cycles through options.

1 2 3 4 5 6 7 8 ... 15 16

Pas de commentaire

Despatch MIC1462 Controller Quick Start Manuel d'utilisateur Page 3