Despatch Protocol Plus Controller (Heat Only) Manuel d'utilisateur Page 39

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 56
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 38
Protocol Plus Owners Manual OPERATION
Version 2 39
Copyright © 2010 by Despatch Industries.
All rights reserved. No part of the contents of this manual may be reproduced, copied or transmitted in any form or by any
means including graphic, electronic, or mechanical methods or photocopying, recording, or information storage and
retrieval systems without the written permission of Despatch Industries, unless for purchaser's personal use.
certain conditions where the center of the oven chamber is not the same temperature as
the control thermocouple. This temperature differential may occur when the oven is not
allowed to soak at a constant temperature for long periods of time, or when the oven is
being used at high temperature. Table 11 shows the menu items available.
5.6.10.3. Access Zone Calibration Page
1. Enter Setup Mode.
2. Press Page until Zone Cal displays.
3. Press Menu.
4. Change each parameter by pressing Menu until the desired parameter is displayed,
and then press ▲ or ▼ to change the value.
5. Press Page to exit the Zone Calibration Page.
O
Use Factory Calibration only when no calibration instrument is
available. Push ▲ to restore factory values.
Table 11. Zone Calibration Page Parameters and Values.
Menu Item
Display
Description
Range
Zone 1
actual
Zone Cal
Zone1Act
Point at which Zone 1 is set
(center of chamber)
-73°C to 760°C (-100°F to
1400°F)
Zone1
displayed
Zone Cal
Zone1Dis
Desired displayed value for Zone
1 setting
-73°C to 760°C (-100°F to
1400°F)
Zone 2
actual
Zone Cal
Zone2Act
Point at which Zone 2 is set
(center of chamber)
-73°C to 760°C (-100°F to
1400°F)
Zone2
displayed
Zone Cal
Zone2Dis
Desired displayed value for Zone
2 setting
-73°C to 760°C (-100°F to
1400°F)
Factory
calibration
15
Zone Cal
FactCal
Restores the factory calibration
values
Ready or Done (push-key)
5.6.10.4. Access Factory Calibration Recovery
Factory Calibration Recovery restores the original factory calibration values. This may be
helpful if the calibration has been lost and a calibration instrument is not readily
available. To use the Factory Calibration Recovery feature only, bypass the Zone 1 and
Zone 2 calibration parameters by pressing Menu.
15
Use only when no calibration instrument is available, push to restore factory values.
Vue de la page 38
1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 55 56

Commentaires sur ces manuels

Pas de commentaire

HP XB968UA Handbücher

Bedienungsanleitungen und Benutzerhandbücher für Notebooks HP XB968UA.
Wir stellen 1 PDF-Handbücher HP XB968UA zum kostenlosen herunterladen nach Dokumenttypen zur Verfügung Datenblatt






Weitere Produkte und Handbücher für Notebooks HP

Modelle Dokumententyp
F0G99UA Datenblatt   HP Chromebook 14-q010nr, 2 Seiten
G2B44EA Datenblatt   HP 15 15-d053ee, 2 Seiten
H6P57EA Datenblatt   HP ProBook 455 G1, 3 Seiten
VQ401EP Datenblatt   HP EliteBook 8540p, 38 Seiten
VM258UA Datenblatt   HP Mini 311-1025NR, 2 Seiten
A8K27EA Datenblatt   HP Mini 110-4110sp, 2 Seiten
QE078UA Datenblatt   HP Pavilion dv6-6115nr, 2 Seiten
YL747UA Datenblatt   HP ENVY 17-1181NR, 2 Seiten
A7P58EA Datenblatt   HP Pavilion dv6-6c57ea, 2 Seiten
J5T38UA Datenblatt   HP 15 15-g024ds, 2 Seiten
J5U61UA Datenblatt   HP Pavilion 17-f042nr, 2 Seiten
G9D77UA Datenblatt   HP 15 r052nr, 2 Seiten
F9H92UA Datenblatt   HP 15 g073nr, 2 Seiten
J1J12UA Datenblatt   HP Pavilion 15-p022nr, 2 Seiten
J2X57UA Datenblatt   HP TouchSmart 15-r023nr, 2 Seiten
FS356AA Datenblatt   HP 500 550, 23 Seiten
VC197ES Datenblatt   HP EliteBook 8530W, 4 Seiten
QE382UA Datenblatt   HP Pavilion dm4-2191us, 2 Seiten
VM352UA Datenblatt   HP G G61-320US, 2 Seiten
XG988UA Datenblatt   HP G G72-B60US, 2 Seiten