Despatch LAD Series WITH PROTOCOL PLUS Manuel d'utilisateur télécharger pdf (Page 64)

c. Reattach the motor lead wires to the terminal strip.

11. Replace the oven bottom (LAD1-42) or control panel front (LAD2-11 or 2-24).

12. Turn the oven right side up.

13. Adjust the fan wheel for 3/16 inch clearance between the wheel and the inlet ring.

14. Tighten the set screws on the fan wheel.

15. Check that the set screws hit the flats machined into the motor shaft.

16. Replace the chamber floor plate.

1 2 ... 59 60 61 62 63 64 65 66 67 68

Pas de commentaire

Despatch LAD Series WITH PROTOCOL PLUS Manuel d'utilisateur Page 64